Final Major Project:
(Temp) Revamped proposal
_________________________________________________________________________________
_________________________________________________________________________________
Research:

_________________________________________________________________________________
Artist Research:
This image was made by an artist by the name of MuYoung Kim, a senior concept artist at Disney. I contacted him and asked for permission to use his image to make a 3d model of and he gave me the all clear for it. I especially liked this picture as I had mainly been looking for game environments and this was one of the best images I found that I could realistically make an environment from with the time we had. The design of the environment is simple yet makes for a nice looking environment, so I decided to do my project based off of this image.
_________________________________________________________________________________
Planning and whiteboxing:
Totals: 14 to Model, 13 to texture - 27 day total.
Fri - Last Day - For the last day of this project everything should be done. The time for today will be spent making slight improvements to anything that needs it.
_________________________________________________________________________________
Screenshots and models:
_________________________________________________________________________________
Critical Assessment - By Harrison
_________________________________________________________________________________
_________________________________________________________________________________
Evaluation:
End of Year show prep:
For my end of year show, we have to show all of our work through the year on an A1 sized piece of paper. This will be how I lay mine out:
After looking through things and realising that some of my things didn't look as good as I wanted them to, I decided to just leave it as the final renders of my first and final project.
Over the course of this project I will have a number of skills I will be able to develop further that will be useful for me. The main thing I will be able to work on will be my 3D modelling and texturing skills, which will be the primary skills I develop. I will also have the opportunity to develop my skills on Photoshop by creating my own textures, or for when I need to make my textures using other images. As my entire project is centred around 3D modelling, I will need to work on this the most. Since I will need to texture everything too I will need to spend alot of time working on my texturing skills almost as much as my modelling skills. At the moment, my modelling skills are relatively good, but I feel my texturing skills is still a bit lacking in terms of making the textures rather than mapping and applying textures.
Proposal:
SECTION ONE – The Final Major Project
The title of this project will be “The Slums” And will center around me making a 3D environment model of a concept piece I found online. https://www.artstation.com/artwork/146mX My aim is to create as much of this concept piece in 3D as I can, fully textured and to make a final render of the finished product looking like the concept piece.
SECTION TWO – Influences, Research, Sources and Ideas
Since my project will be based off someone else’s already existing concept piece, I have emailed the creator of it to ask for permission to base my project off of it and he’s allowed me to use his concept. I would credit him for it in the final piece and will keep him updated as I work along. I’d find extra reference images of things like the cameras and bins to be able to recreate them better as the angles shown in the concept piece don’t make very good things to work off for making them, so getting more reference images will let me make them as close as I can while still making them look correct.
SECTION THREE – Techniques, Processes and Timetables
For modelling, I will be using 3dsMax for the modelling, and will likely have to use Photoshop to make textures. If I am able to get it, using texturing software like Quixel or something like that. That would mean most likely having to pay for the software however, and I’d only be able to use it at home, so it’s unlikely I’ll be able to use that.
SECTION FOUR – Method of Evaluation
My evaluation will basically be how well I recreate the model to the original concept. I will be evaluating myself on how well I create and apply the textures, as well as how well the models I make actually are. I’m also going to be evaluating how well I stick to the plans I make or if I have to change plans, how well I deal with that.
_________________________________________________________________________________
Problems I might come across during the project:
- Perspective on original image isn’t correct, so making the camera angle work well might be difficult
- Solution: Multiple camera angles or just spending lots of time trying to get the camera angle right.
- I’m personally bad at documenting things on time and in general
- Solution: Document regularly regardless of how much I’ve done.
- Might have too many objects to model and texture in the time I have
- Solution: Make some of the minor objects optional.
- Might not have enough time to finish everything
- Solution: Cut things out that can be cut out.
- Personally might get distracted very easily
- Solution: Find less things to distract myself. Take breaks to its easier not to get distracted.
- Work could get corrupted or lost
- Solution: Back up work. Lots.
- Start running out of time for the project and I’ve cut out everything I can
- Solution: Work at home.
Research:
![]() |
| https://www.artstation.com/artwork/lOBO Artist - STRZYG |

![]() |
| https://www.artstation.com/artwork/6NgzW Artist - Sviatoslav Gerasimchuk |
![]() |
| https://www.artstation.com/artwork/n03ko Artist - Yeonji Rhee |
![]() |
| https://mikutskiy.artstation.com/portfolio/3-2c1561db-a362-4125-aaa2-abd98d69bc74 Artist - Alexandr Mikutskiy |
![]() |
| https://www.artstation.com/artwork/BwlP4 Artist - Alistair O'Brien |
![]() |
| https://www.artstation.com/artwork/qoYBR Artist - Morrissey Alexander |
![]() |
| https://robertostranges.wordpress.com/#jp-carousel-218 Artist - Roberto Stranges - Based on work by Escher |
![]() |
| https://www.artstation.com/artwork/5vOmE Artist - Albert Valls Punsich |
![]() |
| https://www.artstation.com/artwork/OyEXK Artist - Toby Lewin - An image like this has a good composition due to the fact that it fits into the rule of thirds. The right tower part fits in the middle of the second and third third. The top and bottom of the roofs fit into the middle lines nicely to make the image look more pleasing. |
![]() |
| https://www.artstation.com/artwork/vzX8Y Artist - Tor Frick - This image uses lots of bright colours and the layout of the hallway draws your attention along to the center, where you can see the entire image. |
![]() |
| https://www.artstation.com/artwork/NGNNg Artist - Jonathan Dufresne |
![]() |
| https://www.artstation.com/artwork/YJBkX Artist - Fredrik Hallén |
![]() |
| https://www.artstation.com/artwork/nEdxX Artist - Tobias Koepp - This image also fits nicely into the rule of thirds but more obviously, the stairs are both on either side of the screen, focusing more on going into the center. The buildings are also on the edges and move towards the center, where there are also other objects to focus on. |
![]() |
| https://www.artstation.com/artwork/RDzYO Artist - Esbjörn Nord - This image also makes use of the rule of thirds but to a more subtle extent, the leftmost building fits into the middle of the left third line, and the roof fits along the top line, as shown on the image: |
The image I will be using for this project is this image I found by an artist called MuYoung Kim.
This looks like it could be used for some kind of first person shooter game rather than a third person, due to the lack of objects to 'hide' behind that a third person shooter would need.
_________________________________________________________________________________
Artist Research:
Artist - David Hier
Element - Texturing guide
While looking through for tips on texturing and how to make good quality concrete textures and came across this artist on a website showing an in depth tutorial on making a concrete texture. The tutorial going in depth and describes how to make the texture seamless, as well as going into bump, displacement and reflectance mapping for objects. It shows a way to create a larger texture that is completely seamless and tileable with no off looking lines in it such as below:
And instead makes it look like this:
And after applying it onto an object you get a result which looks like this:
This will be useful for me as I can take the steps that are taken here to make myself a seamless, tileable concrete texture to apply to my walls and objects that’ll be a good quality image. I knew I would need to know how to make these so I searched for this topic specifically and managed to find this tutorial, which’ll come in useful for when I get to making my textures.
Comparing my current model to the reference it’s based on you can see where I’m going to be applying my textures.
Artist - James Munroe, 343 Industries Environment Artist
Element - Game Environment Tips
I wanted to find some references on making game environments in terms of tips on making them and how they should look so I thought it would be useful to find articles or posts by people who actually work on them in the industry, which is how I came across this one. This was an interview with someone working in 343 Industries who works as an environment artist there. He designed several areas including this multiplayer map in Halo 4:
He also talks about individual prop making and shows an example of a doorway he worked on: 
When asked about the difference between creating environments for campaign and multiplayer, he says the following regarding it: “Creating the assets is usually the same process for me. Generally, people think that there should be a lower poly count, but this should be practiced in campaign environments as well. But I do try and use tiling textures as much as possible. The biggest difference for me is controlling the edges and silhouettes of objects.”
I found this useful to read through as looking at the pictures of the environment, I noticed the camera angles used to show as much of the detail possible while still making the area look well, and also makes me aware that I don’t need to alter my modelling in any drastic way whether or not I imagine this being a multiplayer or campaign level.
Artist - N/A
Element - Improving work as a whole
While looking through for other things that could relate to my project, I came across a site that has lots of articles (I think by the same person.) about environment design. After looking through some of them I found a really useful article about improving my work as a whole, mainly regarding long term, but it can still apply to this project in terms of tricks I can use to improve workflow. It goes into alot of detail about planning and doing things at a manageable pace, while not making things take forever and just leaving them, and shows some examples on how to lay things out for planning.
I will be able to take alot of these tips and use them to improve my own workflow hopefully, even though most apply to longer term projects, I can still use most of them effectively.
Artist - Darren Yeomans
Element - UV mapping tutorial
Our other tutor for the year sent all of us in class a simplified, foolproof tutorial on how to map objects in 3DSmax, which is the software most of us are using. The tutorial goes into enough detail but without making it confusing or complicated on how to map both boxy and spherical/cylindrical objects. It also goes step by step on the whole texturing process, from the mapping to the creation and application of texture pages.
Seeing as Darren is someone who has worked a lot in the industry, he has alot of knowledge on this kind of thing so he knows how to give us the information in a way that’ll be of the most use to us. For mapping and texturing my objects I will almost definitely follow this guide for them, which should hopefully make things easier and less complicated for me and I’ll be able to get things done alot quicker.
Artist - Unknown (Potentially multiple.)
Element - 3ds Max Tutorials
While we have been using Max through all of our projects this year, I thought it would be handy to try and look up some more tutorials and guides on any technical parts on using Max that would be useful to me in the project. I ended up coming across this site that has lots of tutorials on modelling different things in Max and also contains within them tips or tutorials on other aspects of what I can use such as lighting and particle effects. The page has tutorials organised into beginner, intermediate and advanced tutorials, making it easy to pick out ones based on skill level, or go for higher ones to improve with.
While most of these tutorials either aren’t relevant to my project or would take far too long to get the hang of than I have time for in this project, flicking through some of them quickly I can take some useful tips from alot of them and hopefully apply them to my project.
Artist - MuYoung Kim
Element - Original concept image
When I started the project off, I wanted to do my project as a model based off a concept image, as I thought that would be a fun way of doing my project. So I started looking through different sites for some good concepts I would want to do a model of. I wanted to do one I could realistically do while still making it to a good standard. I found a bunch of reference images and eventually settled on this image to go for.
This image was made by an artist by the name of MuYoung Kim, a senior concept artist at Disney. I contacted him and asked for permission to use his image to make a 3d model of and he gave me the all clear for it. I especially liked this picture as I had mainly been looking for game environments and this was one of the best images I found that I could realistically make an environment from with the time we had. The design of the environment is simple yet makes for a nice looking environment, so I decided to do my project based off of this image.
_________________________________________________________________________________
Planning and whiteboxing:
I took the original concept and blocked out the different areas of it. Parts sharing a colour are assets I will be able to make one object of and likely just copy it as I need to. The grayed out areas are simply walls and floors that can easily just be made but will need to be textured.
Asset List:
Green - Pillars - .5 day to model, 1 day to texture
Yellow - Barriers, corner and length - 1.5 day total to model both, 1 day to texture
Cyan - Cameras (Optional) - 2 day to model, 1.5 day to texture
Red - Cables and metal beams - 2 day to model, 1 day to texture
Blue - Lamp Post - 1 day to model, 1 day to texture
Purple, dark - Barrels (Optional) - .5 to model using already made object, Already textured
Purple, light - Vents - 1.5 day to model, 1.5 day to texture
Orange - Box thing - 1.5 day to model, 1.5 day to texture
Grey - assorted walls and floors - 1.5 day to model, 2 days to texture
Pink - Smaller pillars - .5 day to model, 1 day to texture
Dark Blue - Tarp stuff (Optional) - 1 day to mode
l, 1 day to texture
Totals: 14 to Model, 13 to texture - 27 day total.
Day by day plan:
Week 1 was spent finding what I wanted to do and doing some research on different art sites and stuff for inspiration. I found a bunch of different types of models and concepts I like the look of and listed them all here. I eventually came across the picture shown above and decided that I’d want to make a 3d model of it. I emailed the creator of the concept piece and he gave me permission to use the picture to base my work off.
Week 2:
Day 1 - Start and completely finish my proposal. Once that’s finished, should I finish early, I’ll get started on blocking out the image to build an asset list.
Day 2 - By the end of today I should have the scene blocked out and my asset list created. I will also get started on planning out how long each object will take to model and texture so I can plan how long it will all take me, which is when I will start adding the building stage to this plan.
Day 3 - As this is the short day, I will make sure that I've gotten this plan completely laid out by the end and added in the building stage to it so I can plan
Week 3:
Day 1 - Be the end of this day, my entire plan will have been completed, with the building times and texture times factored into the plan. Once this is done, I will also begin whiteboxing out the scene, and to have that finished the next day.
Day 2 - This day I will spend whiteboxing out my scene, adding in a camera at an angle so I know what I need to actually model and where it goes. Once the whiteboxing is done I will also start building the main pillar. Once that is completed I’ll copy it and paste it where it needs to be.
Day 3 - If whiteboxing still needs to be finished that’ll be the first thing I do. Once that’s done, I’ll start making the actual pillars.
Week 4:
Day 1 - Once the pillars have been completed, either the previous week or today, by the end of this day the smaller pillar will be modelled and places where it needs to be.
Day 2 - On day two I’ll start modelling the barriers, starting on the corner piece. I will spend the whole day modelling the corner piece until it’s finished, at which point I’ll start making the straight piece.
Day 3 - During this day I will finish modelling the barriers, likely having to finish off the straight piece as the corner piece should have been done on day 2. Once they’re all done I’ll place them where they need to be.
Week 5:
Day 1 - For this day I’ll start making the street lamp to place in. This shouldn't take any longer than the day to do.
Day 2 - On this day I am going to start modelling the vents. I will have the base one to make, then copies of them slightly altered in shape to fit how they are supposed to.
Day 3 - By the end of this day the vents will be finished and placed in.
Week 6:
Day 1 - I’ll start the modelling on the box during this and the next day. It will likely take the whole day and most of the next to finish.
Day 2 - This day will be spent finishing off the box and placing it into the scene once it’s done. If I finish early I will also start modelling the cables and beams.
Day 3 - If the cables and beams aren’t already started, those will be started today. Otherwise I will just be carrying on modelling them. The cables should be easy to do and will be done relatively quick, but the beams might take a bit longer.
Week 7 - This week I will spend making my texture pages for each object. At this point all of my modelling should be done and before I go onto mapping each object and texturing it, I want to spend the week making a texture page for everything. I will use a varying amount of sized texture pages for each one as necessary.
Week 8:
Day 1 - During this day I will be mapping my pillars and applying the texture to them. I’ll map the one pillar and apply the texture, then copy the pillars over the old ones so I don’t have to remap each one.
Day 2 - This day I’ll start applying the textures to the barriers. I’ll do the same as the pillars and put each texture on one object, then copy it over old ones as necessary.
Day 3 - For today I will be applying textures to the beams and cables. As I don’t need to copy an object to place in multiple places, I can simply just apply the texture to the areas I need to and leave it as it is.
Week 9:
Day 1 - Today will be spent sorting out the texture for the street lamp. There’s only one lamp to texture and it’s fairly straightforward, so I don’t need to copy it over anything.
Day 2 - Today I’ll start texturing the vents. I’ll need to UV each one separately since they are all different but only slightly.
Day 3 - For this day I will be texturing the box. Despite this being the short day, as the box will be fairly easy to map and most of the time would have been taken making the textures, I should be able to get this done in the one day.
Week 10:
Day 1 & 2 - For today and tomorrow I will be applying the textures to the environment itself that I blocked out before. This’ll have been modelled not as one object, but as separate objects that’ll be textured differently from the others. So it makes using a texture page easier.
Day 3 - Today should be the last day I need to spend on the texturing with the smaller pillars. Like the larger ones, I’ll apply the mapping and texture to one, then copy it over the others.
Week 11 - With four weeks including this left, with all the texturing and modelling hopefully done by this point I have a lot of free time left to adjust things and finish off rendering and stuff. In the event that the modelling and texturing isn't done by this point, I will spend this week catching up and finishing off anything that needs finishing off.
Week 12 - If there isn't much to catch up on the previous week, then the remaining time there and this week will be spent adding in optional objects that I planned but didn't include to save time. I will start off my making the camera, which should take about 2 days at the most to model, then a day and a half to texture. Making the texture page should be simple but mapping and applying will take most of the texturing time. If I have enough time left after this, I’ll add some barrels in. This’ll be a lot easier to do since I have a barrel already made. I can make some minor alterations to it if I need to and then just add them into the scene.
Week 13 - This week will be spent sorting out the lighting and rendering for the scene. The camera should have been in place from the start, so from there I just need to work out lighting and stuff. Once that’s all sorted. I’ll render out an image and save it. I’ll also spend any time needed at college and at home to put everything onto my blog and organise it to a good standard.
Week 14 - Free
Planning edits:
Week 3: Originally I planned in the week to do the smaller pillars straight after the larger ones, then to do the barriers. I’m instead going to do those first so I’m able to space the pillars out well using the barriers.
Week 7 onwards: Up until this point I was under the impression that I was able to make my texture pages first and then map and apply everything. However this was not the case so I am having to rework my plan slightly from here on out. Also, our actual timetable is including half terms and holidays as part of our 14 weeks, whereas my original plan didn’t. So I am currently two weeks ahead of where I thought I was, which will need to be factored in when doing this plan and will need to start from week 9 onwards.
Week 9 - This week and week 10 will be spent improving all the other aspects of my work in terms of documentation and making sure everything is up to date. There are still some blanks in the work I need to do that wasn’t included into the plan, so these two weeks will be spent making sure all of these are done.
Week 11 - Wed - If I need to, I will spend an extra day or two finishing off any of the documentation that still needs doing. Once this is done I will begin the texturing process. First things to be mapped and have their texture pages planned will be the walls and floors.
Thu - Thursday I will spend mapping the rest of the more boxy and cylindrical objects in the scene; the box thing, the pillars, and all of the pipes and cables.
Fri - Friday I’ll spend mapping out the street lamp and the vents if I’ve got time for both. There will probably some things I still need to plan, but those can be left for the next week.
Week 12 - Wed - For this day I’ll plan to finish off the rest of the mapping. By the end of this day I should have everything mapped, planned and ready to make texture pages for.
Thu - Today I should begin creating the texture pages for my objects. I will begin by searching for different reference images to use for my pages and gather up enough that I can start making pages for everything. I should also be able to do one of them today so I’ll make the base concrete texture I plan to apply to most of my objects. If I manage to have spare time at the end I’ll begin making some decals for the different objects.
Fri - Today I’ll make the base metal texture that will go on my metal objects. I will also make the roof texture that I’ll use on the roof.
Week 13 - Wed - Starting this week I am going to start on the decals on all the concrete and metal objects, I should be able to finish most of them however I will need to carry over to the next day to finish the rest.
Thu - Today I should have all of the decals finished by the end of the day. Once those are done the rest of the textures will have progress made and should be finished by the end of Friday.
Fri - See above.
Week 14 - Wed - Today I will spend applying the textures onto the objects in my scene and make sure they all fit well in the scene. Once that’s done I’ll begin playing around with the lighting and camera to make a good render from.
Thu - Today will be spent doing the lighting in the scene once everything is done and making sure the scene is ready to make a good quality render from. Once everything is in place I will take the render of the full scene.
Fri - Last Day - For the last day of this project everything should be done. The time for today will be spent making slight improvements to anything that needs it.
_________________________________________________________________________________
Screenshots and models:
_________________________________________________________________________________
Critical Assessment - By Harrison
·
Why did you decide to use this specific concept piece?
o
It was something I liked the look of that seemed
feasible after looking through lots of different environments.
·
Will this be a complete, identical model or has
the concept just influenced you?
o
It likely won’t be an exact copy, but I will
make it as similar as I can.
·
Why style of texture will you use?
o
Lots of metals and concrete, similar to the
concept.
·
How will your model be presented? And what will
you add to the model. Such as ambient occlusion or an animation.
o
Likely no animation, but there’ll be a final
render with lighting using the one camera angle.
·
Have you looked at other concept pieces similar
or completely different?
o
Yes
·
What will your lighting be like? Night, day e.t.c
o
Undecided
·
Will you be adding things to the model that you can’t
see in the concept art?
o
No
·
Will you be having alternate camera angles?
o
No
·
Will you be importing the model into unreal
engine?
o
Only if there’s time at the end.
·
Where is your experimentation
o
No need, I’m basing off a current concept so
there’s no experimentation for what it’s going to be.
Overall I like the idea of your model being based off an
already existing concept piece which makes it easy for reference images.
However you can only see the reference from one perspective. Maybe create a mock-up
of what the environment looks like from a different perspective like the
concept artist has done with the other concepts pieces.
In terms of the model and how it is at the moment you still
have a lot to do in terms of the modelling of the small details like the wiring
on the walls and the above scaffolding.
_________________________________________________________________________________
Objects to create texture pages for:
1 - Main Wall - This and the purple part will use the same texture page of a concrete texture with different textures on parts of it looking similar to the original image in some aspects
2 - Barriers - The lengths and corner pieces of the barriers will share a texture page. WIth the exception of some minor parts, the page could be shared with the concrete texture the walls will use, and add an extra bit onto the bottom just for the barriers.
3 - Pillars, small and large - The small pillars and the wall they’re on will all use the same texture page as the texture for them is supposed to connect to each other. The larger pillar can use the same page as 1, but also use a little extra bit onto the page to add the stripe to them.
4 - Rubbish area - This will have a grass texture made for it. As it is at the moment, there isn’t really anything extra I’m definitely going to be putting on top of it yet, so I may end up just scrapping that part and using the whole lower level with the floor.
5 - Lamppost - This lamppost will use a metal texture on it as opposed to the concrete ones most of the other objects will use. Due to the angle the camera is at and the distance, I might be able to get away with texturing the lamp part the same as the rest.
6 - Metal Fences - The ones on this side will be placed on top of the barriers that are over there. They’re small enough and far enough away that I can just use the same texture page as the lamppost.
7 - Far Side wall - Some edits need to be made to the wall to add an archway, which I can quickly enough do, but this will use the concrete texture page most of the other things are using.
8 - Rooftop - For this I’ll be needing to make a new texture page with a rooftop tile texture on it. This’ll be the only object using this page so I can make it specifically for that object.
9 - Box thing - The box will need it’s own texture due to the detail the texture on it needs. This should be the only object that needs this page as well.
10 - Pipe - The pipe will share the metal texture and will have a small around of rust or wear textured onto it.
11 - Vents - The vents might be able to get away with using the metal texture page, but it’s likely I’m going to end up making one just for them.
12 - Sign - The sign will need it’s own page, but it’s a simple enough one to create as I basically just need to make a logo/sign texture for it.
13 - Upper Wall - The raised bit of the wall will have a separate texture to the concrete texture before in the sense that it’ll have more specific detail on top of concrete as opposed to what the others would have (Graffiti, etc.)
14 - Ramp - Really easy texture to do, can share the concrete page and take the edges used for the barriers for the sides of it.
15 - Doorway - The doorway will have it’s own texture that’ll look different from the concrete on the outside, and will use the concrete texture for the inside.
16 - Floor - A floor texture being a mixture of concrete and rubbish and stuff will be customised for this.
17 - Cables and beams (Not shown) - THe cables and beams will be made and added in, they’ll share a mix of the vent page for some parts and the metal texture for the rest.
Amount of pages needed: 8 (Plus alters)
For some of the pages such as the metal and concrete, they’ll be used for different objects that won’t look the same. For this I will make a base metal and a base concrete texture that are just plain, and will make some small changes to each one to add things appropriate to what they’re going to be added onto (Graffiti, rust, etc.)
-Metal
-Concrete
-Floor
-Doorway
-Sign
-Box thing
-Vents
-Rooftops
_________________________________________________________________________________
Experimentation:
I wanted to select a good enough concrete texture to use as it would be used as a base texture on most of my objects in my scene. I found a few different concrete textures I liked the look of, and layed them all out by each other as shown above to compare them.
- Texture 1 seems good to use for the walls, as it's not too rough or marked, but also isn't perfectly smooth like the walls shouldn't be, this will likely be one I use for my walls, but probably not for anything else.
- Texture 2, when looking at it compared to everything else, just seems too rough and damaged to be effective on what I want to put it on. So this won't be one I use.
- Texture 3 will also likely not be one I use, as this one's just too smooth to use on anything, the walls won't be perfectly smooth, but also won't be very damaged, so I need a texture that's somewhere in between, which this one just doesn't qualify for.
- Texture 4 is more what I'm aiming for, which is one I could easily use for the walls. The difference between this one and number 1 will be how well the texture looks amongst other objects with that texture, one might blend more which isn't what I want.
- Texture 5 is one I want to use for floors, as it's dirty enough to use for the floors, without the texture looking damaged or anything.
I eventually settled on using these two as base concrete textures for my scene:
For the street lamps, as the original image only had one faraway angle to reference off, I went and found more pictures of modern street lamps to base the one I'll model off. The body of the lamp will be fairly easy to make, as it's just making a pole with little room for variation, but for the top part I want to find different options that I can use to make a decent looking model. The rightmost lamp has the top part too long compared to the reference, so I won't use that. The tops of the ones on the left also have that issue, but aren't as rounded as the right one, so that's at least a step in the right direction. The middle one is the one I'll base the top part from since it's got the most resemblance to the original, and I now have another angle to look at it from when I'm modelling it.
There are different types of platforms that artists can publish their work, from sites like Polycount and Artstation, to more personal things like keeping a detailed sketchbook or having a personal website. Each has their own pros and cons to weigh against.
Artstation -
Pros:
- Very professional
- Popular site
- Game industry focused
- Job postings - Can look for work through there
- Able to get constructive feedback
Cons:
- Mostly just finished pieces, so you might not find much stuff detailing the progress on things.
Polycount -
Pros:
- Good source of showing WIPs and finished things
- Popular site
- Easy to get tips and comments on your work
Cons:
- Not as straightforward to find peoples work at a cursory glance
Deviantart -
Pros:
- Very social site
Cons:
- Not very professional
- Hard to find high quality work
Personal Website -
Pros:
- Completely tailored to how you want it
Cons:
- Hard to find usually unless advertised
- Need to make it look professional for it to be good quality
Sketchbook -
Pros:
- Easily organised physical work
- Can make is as professional looking as you can
- Not dependant on internet
Cons:
- Even harder for other people to find than a personal website
Out of all of these the one I’d be most likely to use would be Artstation, especially for this project as I can post my finished piece once it’s done to get feedback on. It also works nicely since the original concept image I’m basing my model off was found from Artstation.
_________________________________________________________________________________
Evaluation:
Over the course of this project I took on a goal that was much more than what I have attempted previously, and came across different challenges that I did my best to overcome. I had created an original plan that I aimed to stick to, but over the course of the project as I found out flaws in the order I was doing things and certain aspects that I was just unable to do when I wanted to, my plan ended up changing quite alot towards the end of the project.
Week 1 through 3 was followed pretty much exactly as I originally planned. By the end of that week I should have gotten whiteboxing done, which I did. I did the whiteboxing so I knew where everything would need to go and it also allowed me to properly see the scaling on all of my objects before actually making them, which definitely helped. Originally however, I was going to start making the pillars that week, but after looking at my whitebox and my plan, I realised that it'd be easier for me to make other objects first before doing the pillars so I could easily space them where they needed to be spaced.
From week 4 through 6 my I wanted to have everything modelled, I'll admit it took a little more time than I was hoping for it to so it ended up running over into the next week, but at the end of this week I realised that my original plan of how I wanted to texture everything wouldn't work well, so I had to start adjusting my plan from there.
From week 7 to 9, we were gone for the end of term holidays, however I didn't realise this counted towards the 14 weeks we had for this project, so I had missed out on two weeks worth of work. When I got back for the start of week 9, I had to start making changes to my plan to adjust for this.
During week 9 and 10, I was told that what my original plan was of doing my documentation last wouldn't be allowed, and I hadn't left myself time anywhere else in the project for me to do it, so the main thing I was doing these two weeks was catching up with all of my documentation, as well as minor changes to my model and to get it to a point where I could start mapping and texturing.
Week 11, 12 and the first part of 13 was spent sorting out mapping for all my objects, as well as finishing off some more documentation that I needed to get done during that time. It took a little longer with everything as I planned to start my textures on week 13, but I had at least managed to get alot of images to make the textures with during that time. The rest of week 13 after the mapping was done was spent sorting out the texture pages for everything, managing to apply base textures to everything and getting some of the smaller objects done.
During the final week, I had to make sure I had everything done that needed to get done. I finished and applied the rest of my textures to my object, as well as making a few decals to use on the pillars. The reason I went with the decals over just making textures on the pages was because I was using the same base texture, but the extra stuff would be different on each pillar. Instead of just making three different pages with the same base but minor adjustments, it was easier to simply make a transparent decal to overlay on top of the pillars to make the extra things on them. I also used decals on the doorway and one of the walls, but didn't make them transparent since they didn't need to be. I had initially came across an issue where the decal wouldn't appear transparent when it should have been, and tried different ways of making it work, from changing the alphas to moving the image around and using a completely different image. I eventually managed to fix it as all I forgot to do was tick a different box within Max to recognise the alphas. I also fixed the cameras and sorted out lighting for my scene, as well as adding in a skyline to make the final render.
![]() |
| Final Render |
![]() |
| Original Concept |
Overall, I'm quite happy with how my final object turned out, It looks pretty close compared to the original image given that I couldn't use all of the same textures on my model. If I was to do this project again I would definitely do things differently by changing how I texture things and maybe model some of the objects better or differently. I would also make and follow my plan in a different way, given that this wasn't very organised and ended up needing to be changed quite a lot.
End of Year show prep:
For my end of year show, we have to show all of our work through the year on an A1 sized piece of paper. This will be how I lay mine out:
After looking through things and realising that some of my things didn't look as good as I wanted them to, I decided to just leave it as the final renders of my first and final project.

















No comments:
Post a Comment